Airlink APSUSB201W Manuel d'utilisateur

Quick Installation GuideModel # APSUSB201WVer. 1A

Section 4Step 3 Click Next.Step 4 Select the printer that is connected to the print server and click Next.

Step 5 Double-click on the Print Server Name, select the Printer Port Name, and click Next.Step 6 Click Reboot (for Windows 95/98/ME) or Finish (for W

Section 7Configuring Wireless PrintingThe following section describes how to setup the print server for wireless printing. It is stronglyrecommended t

Step 4 If you are printing through a wireless router, make sure the Connection Mode is set toInfrastructure.Step 5 Type in the SSID (network name) of

Step 8 Verify your wireless connection with the steps outlined in Section 5.You have successfully configured the print server for wireless printing.St

If you want to print directly to the print server (bypassing the wireless router),follow the steps below. You should use a wired connection to configu

Section 8Technical SupportE-mail: [email protected] Free: 1-888-746-3238Web Site: www.airlinkplus.comThis print server does not support most

Section 1Caution: Before beginning the installation, make sure that the printer driver is installed locally on eachcomputer that will print through th

Step 1Connect one end of the Ethernet cable to the RJ-45 port of the print server and attach the otherend of the cable to a router.Step 2 Make sure th

Section 3Installing SoftwareStep 1 Insert the provided CD and wait for the setup menu to appear.Step 2 Click on Install Utility.Note: If the setup men

Step 4 Click Next.Step 5 Click Yes.Step 6 Click Finish.

Section 4Running PS UtilityNote: If your TCP/IP setting from Section 1 has an IP Address of 192.168.1.x (where x is a numberbetween 2 - 253) AND your

Step 4 Refer back to the TCP/IP setting from Section 1. Note the first three sets of numbers from the IPAddress you wrote down and enter them into th

Verifying Network ConnectionStep 1 Click on Start, Run.Step 2 For Windows 95/98/ME type command and click OK. For Windows 2000/XP, type cmd andclick O

Section 6Running PS WizardWarning: Make sure you have installed the printer driver locally on every computer in your networkbefore running the PS Wiza