Airlink APSUSB2 Manuel d'utilisateur télécharger pdf (Page 2)

Step 1Connect one end of the Ethernet cable to the RJ-45 port of the Print Server

and attach the other end of the cable to a hub/switch/router. See Fig 1.1

Step 2 Make sure all the printers are powered OFF, then connect one end of the

printer cable to the printer port of the Print Server and attach the other end of the cable

to the printer port of the printer. Repeat this process for each printer on your network.

Step 3 Turn ON the printer(s).

Step 4 Plug one end of the power cord into the Print Server and the other end into an

electrical outlet.

Connecting the Print Server to your network

Section 1

Warning: Do not plug the power cord to the Print Server until you have reached Step 4.

Fig. 1.1

1 2 3 4 5 6 7 ... 16 17

Pas de commentaire

Airlink APSUSB2 Manuel d'utilisateur Page 2